Electrosurgical Units

Electrosurgical Units(2 products)

Electrosurgical instruments for cutting and coagulation

GD350-B High-Frequency Electrosurgical Unit

High-frequency electrosurgical unit with three outputs: hand-controlled monopolar, foot-controlled monopolar, and foot-controlled bipolar. Fully floating, defibrillation-protected CF applied part. Dual closed-loop CPU control. Single-plate continuity alarm and dual-plate contact-quality monitoring that cuts output if contact falls. Settings are restored after power loss. All modes run at 512 kHz: pure cut 350 W, blend 1 250 W, blend 2 200 W, blend 3 120 W, and monopolar spot coagulation 120 W, each into 500 Ω, bipolar standard coagulation 50 W into 100 Ω.

Hand, foot, and bipolar outputsFully floating CF applied partDual closed-loop CPU controlNeutral-plate contact monitoring

Applications:

Monopolar cutting and coagulationBipolar coagulation

Inquire Now

GD350-E High-Frequency Electrosurgical Unit

High-frequency electrosurgical unit with hand-controlled monopolar, foot-controlled monopolar, and bipolar outputs. Monopolar is a BF applied part at 4.096 MHz, bipolar is a CF applied part at 2.048 MHz. An insulated neutral electrode can be used. Settings return after power loss, and a single-plate break triggers an audible and visible alarm. Rated output: pure cut 150 W, blend 1 120 W, blend 2 100 W, and spot coagulation 80 W into 500 Ω, soft coagulation 90 W into 200 Ω, spray coagulation 60 W into 1000 Ω, bipolar coagulation 120 W into 100 Ω.

Hand, foot, and bipolar outputsMonopolar 4.096 MHz, bipolar 2.048 MHzInsulated neutral electrodePower-loss and self-test

Applications:

Fine and invasive cuttingMonopolar and bipolar coagulation

Inquire Now

More in this Category

Explore other Surgical Instruments subcategories

Other Categories